Top 10 epaper Raspberry Pi – Barebones

Als Amazon-Partner verdiene ich an qualifizierten Verkäufen.

1. Waveshare

Waveshare 7.5 Inch E-Paper Display HAT Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/STM32

Waveshare - Note:version 2 please use corresponding demo code in wiki. This is an e-ink display hat for raspberry Pi, communicating via SPI interface. Spi interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, supports Raspberry Pi series boards, etc.

Onboard voltage translator, compatible with 3. 3v/5v mcus. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Due to the advantages like ultra low power consumption, industrial instrument, with embedded controller, clear display without electricity, wide viewing angle, 800×480 resolution, it is an ideal choice for applications such as shelf label, 7.5

5inch, and so on. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Standard raspberry pi 40pin gpio extension header, jetson Nano. Please set the e-paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time.
MarkeWaveshare
HerstellerWaveshare
Höhe8.99 cm (3.54 Zoll)
Länge18.01 cm (7.09 Zoll)
Gewicht0.1 kg (0.22 Pfund)
Breite10.01 cm (3.94 Zoll)
Artikelnummer7.5inch e-Paper HAT
Modell7.5inch e-Paper HAT

2. IBest

2.13inch E-Paper Display HAT 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Supports Partial Refresh, SPI Interface

IBest - No backlight, keeps displaying last content for a long time even when power down. Onboard voltage translator, compatible with 3. 3v/5v mcus, comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Compatible with raspberry pi zero/Zero W/Zero WH/2B/3B/3B+/4B. Spi interface, for connecting with other controller boards like Arduino/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing.
MarkeIBest
HerstellerIBest
Gewicht0.01 kg (0.02 Pfund)
Artikelnummer2.13inch E-paper Display HAT
Modell2.13inch E-paper Display HAT

3. IBest

5.65inch E-Paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino

IBest - Onboard spi interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.

The e-paper with advanced Color ePaper ACeP technology, supports 7-Color display. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3. 3v / 5v mcus. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Package content:5. 65inch e-paper Module F x1;PH2. 0 20cm 8pin x1.
MarkeIBest
HerstellerIBest
Gewicht0.09 kg (0.2 Pfund)
Artikelnummer5.65inch E-paper Display Module
Modell5.65inch E-paper Display Module

4. IBest

2.7inch E-Paper Display Module 264x176 Resolution 3.3V/5V Two-Color E-Ink Display epaper Screen HAT for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh,SPI Interface

IBest - Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Compatible with raspberry pi 2B/3B/3B+/Zero/Zero W, Jetson Nano. Onboard voltage translator, compatible with 3. 3v/5v mcus, onboard 4x Keys. Ultra low power consumption, basically power is only required for refreshing, no backlight, keeps displaying last content for a long time even when power down. Spi interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
MarkeIBest
HerstellerIBest
Gewicht0.03 kg (0.07 Pfund)
Artikelnummer2.7inch E-paper Display HAT
Modell2.7inch E-paper Display HAT

5. IBest

4.2inch E-Paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface

IBest - Spi interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Onboard voltage translator, compatible with 3. 3v/5v mcus. Ultra low power consumption, basically power is only required for refreshing. No backlight, keeps displaying last content for a long time even when power down.
MarkeIBest
HerstellerIBest
Gewicht0.05 kg (0.11 Pfund)
Artikelnummer4.2inch E-paper Display Module
Modell4.2inch E-paper Display Module

6. Coolwell

Coolwell Waveshare 10.3inch E-Paper E-Ink Display HAT for Raspberry Pi Series, USB/SPI/I80 Interface, 1872×1404 Pixels,2-16 Grey Scales

Coolwell - Standard raspberry pi 40pin GPIO extension header, supports Raspberry Pi series boards. Ultra low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi/STM32: http://www. Waveshare. Com/wiki/103inch_e-Paper_HAT. No backlight, keeps displaying last content for a long time even when power down. Usb/spi/i80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
MarkeCoolwell
HerstellerCoolwell
Artikelnummer10.3inch e-Ink HAT

7. Waveshare

Waveshare 9.7 inch E-Ink Display HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ E-Paper Screen with 1200x825 Resolution IT8951 Controller USB/SPI/I80 Interface

Waveshare - Compatible with raspberry pi Zero/Zero W/Zero WH/2B/3B/3B+. Usb/spi/i80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down. Low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi/STM32.
MarkeWaveshare
HerstellerWaveshare
Gewicht0.13 kg (0.29 Pfund)
Artikelnummer9.7inch e-Paper HAT
Modell9.7inch e-Paper HAT

8. Waveshare

Waveshare 13.3inch E-Paper E-Ink Display HAT for Raspberry Pi 1600×1200 Pixels Black/White 2-16 Grey Scales USB/SPI/I80…

Waveshare - Comes with development resources and manual examples for Raspberry Pi/STM32. Ultra low power consumption, basically power is only required for refreshing. No backlight, keeps displaying last content for a long time even when power down. Full refresh Time less than 1S. Usb/spi/i80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc. Standard raspberry pi 40pin GPIO extension header, supports Raspberry Pi series boards.
MarkeWaveshare
HerstellerWaveshare
Gewicht0.18 kg (0.4 Pfund)
Artikelnummer13.3inch e-Paper HAT
Modell13.3inch e-Paper HAT

9. Waveshare

Waveshare 10.3inch Flexible E-Ink Display HAT for Raspberry Pi IT8951 Controller USB/SPI/I80 Interface 1872×1404 E-Paper Panels Supports Partial Refresh No Backlight…

Waveshare - Low power consumption, basically power is only required for refreshing. Usb/spi/i80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Total standby power: 01wtyp. Full refresh time: 450ms.

Flexible e-paper, no backlight, keeps displaying last content for a long time even when power down. Gray scale: 2-16 1-4 bit. Due to the advantages like low power consumption, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, wide viewing angle, clear display without electricity, and so on. Outline dimension: 227.

7mm × 165. 8mm × 0647mm. Total refresh power: 1. 2wtyp. Viewing angle: >170°. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards. This is a flexible e-ink display hat for raspberry pi, with embedded controller IT8951, communicating via USB/SPI/I80 interface, 10.3inch, 1872×1404 resolution, supports partial refresh.
MarkeWaveshare
HerstellerWaveshare
Höhe6 cm (2.36 Zoll)
Länge38 cm (14.96 Zoll)
Gewicht0.02 kg (0.04 Pfund)
Breite21 cm (8.27 Zoll)
Artikelnummer10.3inch e-Paper HAT (D)
Modell10.3inch e-Paper HAT (D)

10. Waveshare

Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case

Waveshare - Ultra low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi. Supports waken up by user-defined gesture. No backlight, keeps displaying last content for a long time even when power down. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi Zero / Zero W. 2. 13" capacitive touch e-paper display, 5-point touch, 250×122 pixels.
MarkeWaveshare
HerstellerWaveshare
Artikelnummer2.13inch Touch e-Paper HAT (with case)
Modell2.13inch Touch e-Paper HAT (with case)